TRIMUI Smart Pro S TG5050 Firmware Version 1.0.2 Update Log(Testing)

About Firmware release for TG5050 Smart Pro S Firmware version: 1.0.2

  • Fixed the bug where the LED switch setting was not saved when exiting a game after disabling the LED via the OSD menu.
  • Replaced the background music on the home screen and resolved the device's popping/crackling audio issue.
  • Adjusted the volume of USB audio (external DACs/Type-C headphones) and reduced latency.
  • Added a new "Performance Settings" page in the system settings, allowing mode selection for each emulator individually.
  • The CPU frequency display on the OSD menu now shows both big-core and small-core frequencies. During gameplay, you can limit the emulator's frequency by combining big/small core frequencies with performance settings to better unleash the device's performance.
  • Significantly improved ROM scanning speed. Now, automatic ROM scanning is triggered after ejecting a memory card or exiting USB card-reading mode, reducing the time needed to refresh ROMs after downloading new games.
  • Added large/small screen options for the NDS emulator: (1) Fixed stylus position calibration. (2) Removed forced HQ2x scaling; now follows the configuration file settings. (3) Most themes use Scale2x by default. Specifically, the 2nd and 3rd themes use HQ2x and Scale3x respectively. The 15th theme is optimized for 3D games, providing high-definition rendering only for the main screen. (4) Added relevant on-screen prompts.

This version is still under testing. If you have any better ideas or suggestions, feel free to leave a comment here—we will actively adopt valuable feedback and make fixes accordingly!

Back to blog

39 comments

The left analog issue on my Smart Pro S, I hope this will be resolved in a future firmware update with more accurate joystick calibration, as the current one doesn’t help. At the moment, any sharp downward movement either stops the character or makes them crawl down instead of running. Y:0.

Maxim

So when will release it

Carlos

I received the Trimui Smart Pro S with the new firmware 1.0.2. It’s not detecting any Wi-Fi connections. It’s constantly “scanning”… Any solutions?

Carlos

Not regarding this but pls can you all make a crossmix for trimui smart pro S and send it on github pleéeeeeeeeasseeee

Preet

Subject:
Request to Enable Touchscreen Support on the TrimUI Smart Pro S (TG5050)

Dear TrimUI Team,

My name is Preet Jain, and I recently purchased the TrimUI Smart Pro S (TG5050). Overall, I am very impressed with the console. It offers excellent performance and great value for its price.

However, I have one sincere request. The console is advertised as having a 10-point capacitive touchscreen, but the touchscreen is not usable in the system or during gameplay. Even after enabling the touchscreen option in RetroArch, I was unable to use touch controls, especially in Nintendo DS games where they are very important.

I kindly request that you consider enabling full touchscreen support through the upcoming firmware version 1.0.2 (or a future update). If that is not possible, I would greatly appreciate an official OS or special version that fully utilizes the touchscreen hardware.

Enabling touchscreen functionality would significantly improve the user experience and make the TrimUI Smart Pro S even more enjoyable for many users.

Thank you for your hard work and for creating such a wonderful handheld console. I hope you will consider this suggestion.

Sincerely,

Preet Jain

Preet Jain

Leave a comment